 | NEW: Aquatronica 3 Channel Dosing Pump
Aquatronica dosing pumps guarantee the possibility of metering liquids in your aquarium.the module consists in 3 peristaltic pumps which function independently and allow the following types of dosage:single dosage: allows a pre-established quantity of the substance to be administered at a set time and on set days; repeated dosage: allows a dosage to be repeated at regular intervals (hours - days); weekly dosage: allows the desired dosage to be administered only on set days of the week; diffused dosage: the desired substance is administered evenly over a set time lapse. Aquatronica dosing pumps also administer substances on the basis of data provided by the electrodes connected to the system; this innovative function allows you to automatically correct the water biological balance. There are also 3 optional connectors which in future will allow stirring systems to be connected to the module; this will allow the metering of semi liquid substances (which would tend to deposit).TECHNICAL DATAPower supply voltage: 115V 60Hz - 220V 50Hz Number of pumps: 3Min. resolution: 1 mlAccuracy: ± 5%
Price: £199.99
|
|
 |
 | NEW: Aquatronica Ethernet Module
Thanks to the Ethernet module and a remote connection, it is possible to dialogue via internet or LAN networks. This allows the user to check the Aquarium Controller in two distinct ways:by connecting from any internet point, via a browser; by connecting to a LAN network. In both cases, it is possible to monitor the aquarium data and also manually enable and disable every single socket of the power units connected to the system.It is also possible to enable email alarm management (you receive a message at the desired email address if a malfunction occurs).
Price: £119.99
|
|
|
|
|
 | Aquatronica Control Unit
The Aquatronica AQUARIUM CONTROLLER SYSTEM is an easy to use electronic system, which is capable of managing all of the electric utilities, as well as monitor numerous parameters and chemical values of an aquarium; it can be used for either freshwater or salt water aquariums, or even for both at the same time.The heart of the system is the "Control Unit": this controls all of the interfaces which are used for reading the chemical values of an aquarium as well as all the other accessories connected to the system. What makes the Aquarium Controller System so unique is its ability to be set up to meet any requirements the user may have. In fact, Aquatronica offers a complete range of products to create a comprehensive and versatile system; by starting with the basic components (Control Unit, Power Unit and temperature sensor) the user can expand the system with Aquatronica interfaces and accessories to meet their own particular needs.
More Details
Price: £199.99
|
|
|
 | Aquatronica Power Unit with 6 way Plug Bar
ACQ012-UK - Power unit with 6 sockets I/O standard UK This unit powers the Aquatronica Controller and allows the controller to turn items plugged into the 6 sockets on and off. Up to ten of these maybe run from one controller.Power unit with 6 sockets For piloting 220V devices in On/Off mode Suitable for connecting pumps, filters, lights, skimmers, etc. Mains voltage: 220V - 50Hz Maximum output: 3,000WTECHNICAL SPECIFICATIONS Input voltage 240 VAC - 50HzOutput voltage 240 VAC - 50HzMaximum output power 3000W (16A max)
Price: £139.99
|
|
|
 | Aquatronica PC Interface and Software
PC KIT is composed by a PC Interface (ACQ220), the PC software and an adapter RS232-USB.Thanks to this kit, "Aquarium Controller" system could be connected to a PC in order to be able to do downloads of data, define settings and achieve operations of software updating.The Aquatronica software allows the user to:" Create programs on the system and monitor all the values of the sensors and accessories connected to the outlets, directly and conveniently from a PC. " Graphically display data records from various sensors and monitor in real time the accessories connected to the system, such as Power Units and sensors. " Download new versions and update the system's software with the latest versions available.
Price: £59.99
|
|
|
 | Aquatronica pH Interface
PH Interface for measuring and checking the pH in the aquarium, by simply connecting an Aquatronica pH electrode.The PH interface consists of:" a connector for the BUS connection to the Aquarium Controller system;" a standard BNC connector for connecting the electrode. Virtually any BNC pH electrode will do.The moment the interface is connected, it will automatically be identified by the system "Plug & Play" as well as enable the relevant configuration menu.
Price: £47.99
|
|
|
 | Aquatronica pH Probe
The pH electrode measures the pH level of an aquarium in continuous immersion. It must be connected to the AQUARIUM CONTROLLER SYSTEM through the appropriate interface. Thanks to the Controller's flexibility, it is possible to simultaneously connect and monitor several electrodes and interfaces of the same type.Measuring specifications: Measuring range: from 0 to 14 pH Measuring resolution: 0.01 pH Hysteresis: Set by user Set programmes: max. 20 Alarms: Audio and visual with thresholds set by user " Calibration: 2-point semi-automatic " Material : Plastic electrode with double glass joint
Price: £59.99
|
|
|
 | Aquatronica Temperature/Level Interface
The first temperature sensor connected to the controller does not require an interface.Aquatronica makes it possible to expand the basic Aquarium Controller system by adding additional temperature and level sensors to those already connected to the Power Unit. The Temperature & Level Interface enables the user to connect additional Aquatronica temperature and level sensors.This interface consists of:" a connector for the BUS connection to the Aquarium Controller system;" two connectors for connecting the sensors mentioned above. The moment the interface is connected, it will automatically be identified by the system "Plug & Play" as well as enable the relevant configuration menu.
Price: £47.99
|
|
|
 | Aquatronica Temperature Sensor
The temperature sensor continuously measures the temperature of the water: as it is impermeable it can be immersed in the aquarium without any problems. The value read by the temperature sensor can be compensated and calibrated manually using the Control Unit.It must be connected to the Power Unit with the relevant connector. The control unit will take ONE temperature probe without needing a temperature interface. Extra temperature sensors would need an interface each.
Price: £19.99
|
|
|
 | Aquatronica Level Sensor
The Level sensor monitors the level or presence of water in any container. It is particularly suitable for monitoring the water level in external filters, making it possible to top off the water level automatically.The level sensor must be connected to the Power Unit or the relevant interface.
Price: £20.99
|
|
|
 | Aquatronica Redox Interface
Redox Interface for measuring and checking the ORP value (Oxide-Reduction Potential) in the aquarium, by connecting an Aquatronica ORP electrode.This interface consists of:" a connector for the BUS connection to the Aquarium Controller system;" a standard BNC connector for connecting the electrode. The moment the interface is connected, it will automatically be identified by the system "Plug & Play" as well as enable the relevant configuration menu.
Price: £47.99
|
|
|
| Aquatronica Redox Probe
The Redox electrode (ORP) measures the ORP value of an aquarium in continuous immersion. It must be connected to the AQUARIUM CONTROLLER SYSTEM through the relevant interface. Furthermore, the user may connect several electrodes and interfaces to a single system simultaneously.Measuring specifications:" Measuring range: from -300mV to 600mV " Measuring resolution: 1 mV " Hysteresis: Set by user " Set programmes: max. 20 " Alarms: Audio and visual with thresholds set by user " Calibration: 1-point semi-automatic " Material : Plastic electrode with double glass joint
Price: £69.99
|
|
|
 | Aquatronica Freshwater Conductivity Interface
Conductivity Interface for measuring and checking the value of the Conductivity in fresh water aquariums, by connecting an Aquatronica EC (Electro Conductivity) electrode.This interface consists of:" a connector for the BUS connection to the Aquarium Controller system;" a connector for the connection to the electrode. The moment the interface is connected, it will automatically be identified by the system "Plug & Play" as well as enable the relevant configuration menu.
Price: £47.99
|
|
|
| Aquatronica Freshwater Conductivity Probe
The EC electrode (Electro Conductivity) measures the Conductivity of the water in Fresh Water aquariums, in continuous immersion. It must be connected to the AQUARIUM CONTROLLER SYSTEM through the appropriate interface. Thanks to the Controller's flexibility, it is possible to simultaneously connect and monitor several electrodes and interfaces of the same type.Measuring specifications:" Measuring range: from 0?S to 10,000?S " Measuring resolution: 10?S " Hysteresis: Set by user " Set programmes: max. 20 " Alarms: Audio and visual with thresholds set by user " Calibration: 1-point semi-automatic " Material: Plastic electrode with 4 rings
Price: £49.99
|
|
|
 | Aquatronica Saltwater Density Interface
Density Interface(Salinity) is used for measuring and monitoring the value of the Density in saltwater aquariums, by connecting an Aquatronica EC (Electro Conductivity) electrode.The Density Interface consists of:" a connector for the BUS connection to the Aquarium Controller system;" a connector for the connection to the electrode. The moment the interface is connected to the system, it will automatically identify the sensor "Plug & Play" as well as enable the relevant configuration menu.
Price: £47.99
|
|
|
 | Aquatronica Saltwater Density Probe
The EC electrode (Electro Conductivity) measures the Density of the water in Marine aquariums, in continuous immersion. It must be connected to the AQUARIUM CONTROLLER SYSTEM through the appropriate interface. It is possible to simultaneously connect several electrodes and interfaces to the system.Measuring specifications:" Measuring range: from 0?S to 100?S " Measuring resolution: 0.1?S " Hysteresis: Set by user " Set programmes: max. 20 " Alarms: Audio and visual with thresholds set by user " Calibration: 1-point semi-automatic " Material: Plastic electrode with 4 rings
Price: £129.99
|
|
|
