|
 |
 | Aquamedic Aquaniveau Level Controller
The aquaniveau electronic level controller may be used in 2 different modes:1/ As a top up controller with one or two float switches, which is used to control the replacement of evaporated water. One switch controls the pumping from a storage vessel (not supplied), the other, if opted for, provides protection to prevent the top up pump (not supplied) from running dry. As refill pump, we recommend the peristaltic pump SP 3000.2/ As maximum / minimum contact to control reverse osmosis units, in conjunction with a solenoid valve.For extra safety both level switches are low voltage. The control unit is supplied with either one or two sensors.
Manufacturer's Website
Which one would you like?
|
|
|
|
|
|
|
 | Aquamedic Light Computer
The Aqua Medic Light Computer is designed to closely simulates nature's illumination for the aquarium. It is supplied with three separate programmable channels. Channel one controls the primary lamp (e.g. metal halide, maximum 750 Watt). Channel two controls the additional light (e.g. blue fluorescent, maximum 300-Watt). The third channel, the specialty of the computer, controls a night light with a maximum of 100 watt. The night-light's intensity is controlled using an internal program to simulate the natural 29-day moon cycle. These three channels therefor simulate the cycle dusk to dawn. This cycle is of major importance for many plants and animals in setting a rhythm in their reproduction cycle.
Manufacturer's Website
Price: £280.00
|
|
|
 | Aquamedic pH Controller
The pH controller 2001 C is a precision instrument to control the pH value in aquariums. In combination with a supply of CO2 (CO2 unit plus solenoid valve), the pH in an aquarium can be kept at a constant level and the CO2 supply to water plants can be ensured. The unit is supplied with a large LED display and the control range is digitally adjustable from pH 3.5 to 10.5. The pH controller has a BNC connection for pH electrodes. We recommend the use of the original Aqua Medic plastic shaft electrode.
More info......
Price: £149.99
|
|
|
 | Aquamedic pH Computer & Electrode
The Aqua Medic pH Computer has the most modern microprocessor installed. This fulfills the high demands for accuracy when measuring and controlling the needed values. Water proofed finger-touch keys are used to set the needed values and calibrate the electrode. The pH Computer is used to control the exact values of pH in the aquarium or Aqua Medic Calcium Reactor. The controlling accuracy if fixed at 0,05 pH. The computer can switch up to 500 watts using the supplied external electrical socket. When the calibration key has been selected the unit will automatically calibrate itself with the electrode. A plastic shaft pH electrode with BNC fitting and the correct calibration fluids are included.
Manufacturer's Website
Price: £250.00
|
|
|
 | Aquamedic Redox (mv) Controller
The mV Controller 2001 C is designed for monitoring and controlling the redox-potential (= ORP= oxidation-reduction-potential) in aquariums. The unit has a broad controlling range from a minus 500 to a plus 500 mV and a measuring range from minus 1000 to plus 1000 mV. It can be used to control the supply of ozone in salt-water aquariums and/or for the control of the nitrate removal in anaerobic biological filters (Aqua Medic Nitratereductor). The unit is supplied with a BNC connection for the mV probe. We recommend using the original Aqua Medic plastic shaft electrodes.
Manufacturer's Website
Price: £150.00
|
|
|
|
|
|
|
|
|
 | Aquamedic Temperature Computer
The Temperature Computer is a precise multi-functional, temperature controller. It includes a digital temperature sensor. The mode of operation can be set using the function keys, either as a heater or cooler controller. In "heating" mode actual temperature is adjusted to the set value using a pulse-packet control with an accuracy of 0.1°C. In "cooler" mode, the accuracy is 0,5°. The maximum useable wattage for heaters is 1000 watt and for coolers 600 watt.
Manufacturer's Website
Price: £170.00
|
|
|
 | Aquamedic Conductivity Controller
The salt content of water can be determined using the electrical conductivity. A special feature of the Conductivity monitor and controller LF 2001 C is the broad measuring and control range, that is divided into 2 ranges: From 0 - 2.000 µS, the unit is used for monitoring desalinated water and freshwater, in the range 0 - 200 mS for brackish and salt water. Thus the unit can be used for the control of reverse osmosis units and breeding tanks with soft water and for the control of the salt content in marine aquariums. The unit is supplied with a directly connected, seawater resistant graphite electrode. Conductivity monitor and controller 2001 C
Manufacturer's Website
Price: £225.00
|
|
|
 | Aquamedic Electrodes
Aqua Medic pH and Redox-potential electrodes are quality products for accurate measurement, and have a long trouble free operational use. Both types of electrodes are available in three versions: 1. Standard electrodes -with plastic shaft 2. Glass electrodes - for high demands and long performance3. Electrodes with plastic shaft and thread PG 13.5. These are pressure resistant up to 3 bar and can be used in plumbing or in closed versions of the Aqua Medic Nitratereductors and Calcium Reactors. An electrode holder is available as an option. It can hold up to four electrodes, and can be attached to the vertical or horizontal glass strips inside the aquarium, or mounted directly to the aquarium glass.
Which one would you like?
|
|
|
|
|
